Vol. 30 No. 2 (2020)

Published: 2020-06-30

Review Articles

  • Tribological properties of carbon-reinforced epoxy composites - A review

    DOI: https://doi.org/10.55713/jmmm.v30i2.541
    Y Åžahin, H Åžahin

  • Ceramic and glass-ceramic fillers in dental composites - A review

    DOI: https://doi.org/10.55713/jmmm.v30i2.604
    S Ghosh

  • In search for near-room-temperature superconducting critical temperature of metal superhydrides under high pressure: A review

    DOI: https://doi.org/10.55713/jmmm.v30i2.858
    U Pinsook

Original Research Articles

  • Preparation of alginate/2-hydroxyethyl methacrylate composite beads: Role of fillers and characteristics of bead formation

    DOI: https://doi.org/10.55713/jmmm.v30i2.552
    S Urusetthanon, S Udon, B Kusuktham

  • Synthesis and fabrication of polyaniline/eggshell composite in ammonia detection

    DOI: https://doi.org/10.55713/jmmm.v30i2.649
    N A Mazlan, J M Sapari, K P Sambasevam

  • Effect of polystyrene molecular weight and zinc oxide concentration on dewetting behavior of polymeric thin films

    DOI: https://doi.org/10.55713/jmmm.v30i2.613
    K Sujaroon, P Whangdee, N Pangpaiboon

  • Synthesis and characterization of ball-milled eggshell and Al2O3 reinforced hybrid green composite material

    DOI: https://doi.org/10.55713/jmmm.v30i2.680
    S Kumar, S Dwivedi, V K Dwivedi

  • Production of silica-based ceramics sintered under nitrogen atmosphere from rice husk and sugarcane bagasse ash

    DOI: https://doi.org/10.55713/jmmm.v30i2.615
    W Khopthong, B Cherdhirunkorn

  • Tribology, mechanical properties and coloration of a mica glass-ceramic

    DOI: https://doi.org/10.55713/jmmm.v30i2.627
    S Prasertwong, S Angkulpipat, T Srichumpong, K Suputtamongkol, C Thanachayanont, R Sola, G Heness, C Leonelli, D Chaysuwan

  • Green-based corrosion protection for mild steel in 3.5 % NaCl and distilled water medias: Jatropha curcas and Roselle extracts

    DOI: https://doi.org/10.55713/jmmm.v30i2.708
    M A Afandi, S N Saud, E Hamzah

  • Effects of sodium silicate as liquid phase sintering additives on properties of alumina ceramics

    DOI: https://doi.org/10.55713/jmmm.v30i2.643
    K Siriphaisarntavee, C Mongkolkachit, M Jiarawattananon, K Serivalsatit, T Wasanapiarnpong

  • XAS analysis of copper binding in soils

    DOI: https://doi.org/10.55713/jmmm.v30i2.646
    W Siriwong, P Amonpattaratkit, W Klysubun

  • Dry-sliding wear of the 316L/h-BN composites produced under crack ammonia atmosphere

    DOI: https://doi.org/10.55713/jmmm.v30i2.700
    E Chusong, P Kansuwan, N Ohtake, P Wila, N Tosangthum, R Tongsri

  • Properties of wood-plastic composites based on pvc/pla/pbat ternary blend

    DOI: https://doi.org/10.55713/jmmm.v30i2.716
    L Raksaksri, P Chaiwutthinan, A Larpkasemsuk, S Chuayjuljit, A Boonmahitthisud

  • Synthesis of hydroxyapatite from cuttlebone under various pH conditions: An approach for medical materials

    DOI: https://doi.org/10.55713/jmmm.v30i2.741
    S Kangkan, P Arpornmaeklong, S Ummartyotin