Metal and Alloys

39 Items

All Items

  • A review on recent progress in supported magnetic nanoparticles: From synthetic methods to applications

    Khushboo DHIMAN, Ayashkanta NANDA, Navneet KAUR, Manvinder KAUR, Harvinder Singh SOHAL, Himanshi SHARMA, Meenakshi VERMA
    e2437
    DOI: https://doi.org/10.55713/jmmm.v35i4.2437

  • Adhesive wear characteristics of mono and hybrid CF/Ep composite with nano-HAP filler

    Divya GURKAR SOMASHEKAR, Naveena BETTAHALLI ESWAREGOWDA, Suresha BHEEMAPPA
    2040
    DOI: https://doi.org/10.55713/jmmm.v34i3.2040

  • Analyse the mechanical property optimization for FDM/3D-printed polycarbonate using Taguchi and TOPSIS techniques

    N. SRINIVASA RAO, Raman KUMAR, N. KAVITHA, Ramachandran T, Hari Prasadarao PYDI, Aman SHANKHYAN, Ram SUBBIAH, Vikasdeep Singh MANN
    e2196
    DOI: https://doi.org/10.55713/jmmm.v35i1.2196

  • Arginine-modified surface coffee grounds activated carbon for Pb\(^{2+}\) adsorption: Kinetic, isotherm and thermodynamic studies

    Jarawee CHUPIROM, Sirikorn KHAOPHONG, Nopporn HEMYAKORN, Sonchai INTACHAI, Panita Kongsune
    e2148
    DOI: https://doi.org/10.55713/jmmm.v35i1.2148

  • Atmospheric corrosion of hot dip galvanized structural steel exposed to the tropical climate of Thailand

    Adithep BUNPHOT, Pakawat SANCHAROEN, Somnuk TANGTERMSIRIKUL, Taweep CHAISOMPHOB
    e2115
    DOI: https://doi.org/10.55713/jmmm.v35i1.2115

  • Controlling titanium incorporation in hydrogenated amorphous carbon films via closed-loop feedback in reactive high power impulse magnetron sputtering

    Pornthip RATCHAYOTEE, Artit CHINGSUNGNOEN, Phitsanu POOLCHARUANSIN
    2114
    DOI: https://doi.org/10.55713/jmmm.v34i4.2114

  • Crack Development of Electroplated NiW Alloys and their Wettability and Tribological properties

    Jidsucha DARAYEN, Suwat PLOYPECH, Martin METZNER, Claudia Beatriz dos SANTOS, Petch JEARANAISILAWONG, Yuttanant BOONYONGMANEERAT
    e2376
    DOI: https://doi.org/10.55713/jmmm.v35i4.2376

  • Development of forming limit diagrams for motorcycle fuel tank made from AA5754-O under deep drawing

    Phiraphong LARPPRASOETKUN, Jidapa LEELASEAT, Aeksuwat NAKWATTANASET, Surasak SURANUNTCHAI
    2013
    DOI: https://doi.org/10.55713/jmmm.v34i3.2013

  • Electrochemical study of Zn-Fe alloy coatings on mild steel for automotive applications

    Ramesh BHAT, A. CHITHARANJAN HEGDE
    e2218
    DOI: https://doi.org/10.55713/jmmm.v35i2.2218

  • Elucidating the corrosion of carbon steel in hybrid monoethanolamine solutions containing methanol or n-methyl-2-pyrrolidone

    Pui Yee TAN, Lian See TAN, Swee Pin YEAP, Peck Loo KIEW, Mee Kee WONG, Azmi Mohd SHARIFF
    e2157
    DOI: https://doi.org/10.55713/jmmm.v35i2.2157

  • Fabrication and characterization of Sb-doped MXene prepared by hydrothermal method for use as a sensing electrode for heavy metal detection

    Siranaree PHOOHADSUAN, Thitima Maturos DANIELS, Mati HORPRATHUM, Nichaphat THONGSAI, Eakkasit PUNRAT
    2008
    DOI: https://doi.org/10.55713/jmmm.v34i2.2008

  • Fabrication of porous geopolymers utilizing aluminum wastes as foaming agent

    Siriwan CHOKKHA, Jiratchaya AYAWANNA, Anurat POOWANCUM, Thanasak SINGLAEM, Pusit MITSOMWANG
    1966
    DOI: https://doi.org/10.55713/jmmm.v34i2.1966

  • High-performance NO2 gas sensor based on reduced graphene oxide/ZrO2 hybrids

    Ali Jabbar FRAIH, N. Naeema, Fatima Fadhil ABBAS
    2038
    DOI: https://doi.org/10.55713/jmmm.v34i3.2038

  • The Impact of hot rolling, Zn and Sn on the mechanical and corrosion characteristics of Mg-Zn-Ca alloys

    Halil EREN, Ali GÜNGÖR, Erkan KOÇ, Harun ÇUĞ
    2092
    DOI: https://doi.org/10.55713/jmmm.v34i4.2092

  • Improving the mechanical performance of 45S5 3D scaffolds through the particles of barium titanate ceramics

    Surirat YOTTHUAN, Usanee PANTULAP, Nuttawan SAWANGBOON, Ornuma TUNGSANGUAN, Ekarat MEECHOOWAS, Kansiree KAEWMORAKOT, Nathaporn UTHAICHAI, Theerachai BONGKARN
    e2308
    DOI: https://doi.org/10.55713/jmmm.v35i3.2308

  • Influence of the casting processes and aging times on the microstructure and hardness of AlSi\(_{12}\)Cu cast alloys

    Said BEROUAL, Pascal PAILLARD, Yann BORJON-PIRON
    e2220
    DOI: https://doi.org/10.55713/jmmm.v35i2.2220

  • Investigating the oxidation behavior of Mg-Zn alloy: Effects of heating rates, gas flow, protective atmosphere, and alloy composition

    Tuğçe Nur SARAÇOĞLU, Safa POLAT, Erkan KOÇ, Muwafaq MASHRAH, Amir NAJAH SAUD, Marta MICHALSKA-DOMAŃSKA
    2033
    DOI: https://doi.org/10.55713/jmmm.v34i3.2033

  • Investigation into parameters affecting the synthesis of hybrid gold nanoparticle/ nitrogen-doped carbon dot colloids

    Thammika SRISAMAN, Anyarat Watthanaphanit
    e2112
    DOI: https://doi.org/10.55713/jmmm.v35i1.2112

  • Investigation of photocathodic corrosion protection of ZnO/ZnS thin film for AISI 304 stainless steel in 3.5 wt% NaCl solution

    Soravid VEERAPONG, Naw Blessing OO, Boossayamas DACHBUMROONG, Parichart CHAUM, Thanate NA WICHEAN, Oratai JONGPRATEEP, Naray PEWNIM, Gasidit PANOMSUWAN, Ratchatee TECHAPIESANCHAROENKIJ
    e2105
    DOI: https://doi.org/10.55713/jmmm.v35i1.2105

  • Investigation of pressure and temperature distributions in aerofoils using CFD simulation

    Ramesh KRISHNAN L, Jasgurpreet Singh CHOHAN, S. VIJAYAKUMAR, N. BEEMKUMAR, Sriram DESIKAN, V Nagabhushana RAO, M.Naga Swapna SRI, Mayank KUNDLAS
    e2213
    DOI: https://doi.org/10.55713/jmmm.v35i2.2213

  • Lactic acid-assisted complexation for enhanced lithium extraction and its application to spent LIBs

    Sibananda SAHU, Niharbala DEVI
    e2245
    DOI: https://doi.org/10.55713/jmmm.v35i1.2245

  • Liquid-liquid extraction of Nd(III) using [P66614][Cy272] ionic liquid

    Prasanjit DAS, Kali SANJAY, Niharbala DEVI
    e2252
    DOI: https://doi.org/10.55713/jmmm.v35i3.2252

  • Low-cost high performance sustainable triboelectric nanogenerator based on laboratory waste

    Archana PANDA, Kunal Kumar DAS, Kushal Ruthvik KAJA, Venkataramana GANDI, Sunit Gourav MOHANTY, Basanta Kumar PANIGRAHI
    e2226
    DOI: https://doi.org/10.55713/jmmm.v35i1.2226

  • Mechanochemical synthesis of Ni(II)-tptz complexes with co-ligands: Spectroscopy, DFT, and biological studies

    Deepak SENAPATI, Anulipsa PRIYADARSHINI, Debadutta SAMAL, P. Ramesh BABU, Satyanarayan SAHOO, Narayan CHANDRA BERA, Raghabendra SAMANTARAY, Jagannath PANDA, Rojalin SAHU
    e2324
    DOI: https://doi.org/10.55713/jmmm.v35i2.2324

  • Nutrient retention and availability of biochars prepared by co-pyrolysis of vinasse with sugarcane filter cake

    Siraprapra SUWANREE, Jesper T.N. KNIJNENBURG, Emirhan M. ÖLҪER, Kaewta JETSRISUPARB
    2147
    DOI: https://doi.org/10.55713/jmmm.v34i4.2147
1-25 of 39