ปีที่ 36 ฉบับที่ 1 (2026): March

เผยแพร่แล้ว: 2026-02-27

บทความปริทรรศน์

A review on biomass-derived hard carbon anodes for sodium-ion batteries: From carbon precursors to storage mechanisms

Anqi LU, Jiaqian QIN

e2555
- PDF (English)
DOI: https://doi.org/10.55713/jmmm.v36i1.2555

Original Research Articles

Mechanical properties and crystallization of polybutylene terephthalate reinforced with glass flakes and aluminum powder

Nattakarn HONGSRIPHAN, Pajaera PATANATHABUTR

e2301
- PDF (English)
DOI: https://doi.org/10.55713/jmmm.v36i1.2301
Synthesis, structure, and electrochemical properties of the Ni(OH)\(_{2}\)/NiMoO\(_{4}\) composite on the rGO/NF template for hybrid battery-supercapacitor electrodes

Retno ASIH, Haniffudin NURDIANSAH, Rogabe SIANIPAR, Ida Ayu GAYATRI, Lukman NOEROCHIM, Diah SUSANTI, Isao WATANABE, Darminto DARMINTO

e2309
- PDF (English)
DOI: https://doi.org/10.55713/jmmm.v36i1.2309
Development of poly(lactic acid)/ethylene-propylene-diene monomer/cellulose composites using cellulose extracted from hemp biomass for plastic packaging applications

Supanicha ALAPON, Natthanich THONGMEE, Wikoramet TEEKA, Pattara SOMNUAKE, Sirirat WACHARAWICHANANT

e2332
- PDF (English)
DOI: https://doi.org/10.55713/jmmm.v36i1.2332
Effects of gum additives on nickel electroplating for enhancing steel corrosion resistance

Supitcha SUPANSOMBOON, Manatsawee MANEEKAN, Chanyanut SAENTHAWEESUK, Duangta SITTHICHOKCHAROEN, Natthapong PHINICHKA

e2334
- PDF (English)
DOI: https://doi.org/10.55713/jmmm.v36i1.2334
Effect of Cu content on microstructure, morphology, and antibacterial properties of Ti-Cu alloy thin films

Chittra KEDKAEW, Phalakorn KHWANSUNGNOEN, Tanattha RATTANA

e2340
- PDF (English)
DOI: https://doi.org/10.55713/jmmm.v36i1.2340
Contributions of carbon content and cooling rate on phase transformations and mechanical properties of sintered Fe-1.5Cr-0.2Mo-xC alloys

Mantana YARUAN, Wantana KOETNIYOM, Thanyaporn YOTKAEW, Nattaya TOSANGTHUM, Ruangdaj TONGSRI

e2346
- PDF (English)
DOI: https://doi.org/10.55713/jmmm.v36i1.2346
Synergy of ground granulated blast-furnace slag and limestone powder in ternary cement: Effects on heat of hydration and strength development

Pailyn THONGSANITGARN, Watcharapong WONGKEO, Thanongsak NOCHAIYA, Arnon CHAIPANICH

e2394
- PDF (English)
DOI: https://doi.org/10.55713/jmmm.v36i1.2394
Effect of garnet incorporation on the functional properties of sunscreens

Parinya CHAKARTNARODOM, Kanyarat MUNMANI, Sureerat POLSILAPA, Duangrudee CHAYSUWAN, Wichit PRAKAYPAN, Passakorn SONPRASARN, Edward LAITILA, Nuntaporn KONGKAJUN

e2406
- PDF (English)
DOI: https://doi.org/10.55713/jmmm.v36i1.2406
Synthesis and photoluminescence properties of graphene quantum dots prepared via carbonization under pressure reduction

Sutthipoj WONGRERKDEE, Pichitchai PIMPANG

e2412
- PDF (English)
DOI: https://doi.org/10.55713/jmmm.v36i1.2412
Effects of welding currents on microstructure and corrosion behaviors of Inconel 625 cladding on 2.25Cr-1Mo steel by Hot-wire TIG

Supparat SAEHENG, Hein Zaw OO, Prapas MUANGJUNBUREE

e2422
- PDF (English)
DOI: https://doi.org/10.55713/jmmm.v36i1.2422
Development of 4-vinylbenzyl chloride (VBC) grafted onto branched polyethylenimine (PEI) onto bacterial cellulose sheet by gamma-induced irradiation technique for Cu\(_{2+}\) ion adsorption

Methinee WONGWAI, Supitchaya KULRATKITIWONG, Thitirat RATTANAWONGWIBOON, Sarute UMMARTYOTIN

e2424
- PDF (English)
DOI: https://doi.org/10.55713/jmmm.v36i1.2424
High temperature storage reliability of Cu pillar flip chip interconnects

Kachain WORAPAKDEE, Anusara SRISRUAL

e2466
- PDF (English)
DOI: https://doi.org/10.55713/jmmm.v36i1.2466
Degradation of wastewater by Advanced Oxidation Processes using green synthesised CuO nanoparticles

Srinivasan VISHAL, Anand SARVESVARON, Muralidharan KEERTHANA, Hemanth Sanjay REDDY, A Babu PONNUSAMI

e2467
- PDF (English)
DOI: https://doi.org/10.55713/jmmm.v36i1.2467
Dual-functional activated carbon from coffee grounds for crystal violet dye removal and subsequent application as an electrode material in energy storage devices

Sirikorn KHAOPHONG, Tawatchai KANGKAMANO, Sonchai INTACHAI, Panita KONGSUNE

e2488
- PDF (English)
DOI: https://doi.org/10.55713/jmmm.v36i1.2488
Investigation on the tribological properties of Al\(_{2}\)O\(_{3}\)-TiC substrates in fixed abrasive lapping for data storage applications

Benjie Locsing FERNANDEZ, Thanakrit SRISUWAN, Duangamol TUNGASMITA, Sukkaneste TUNGASMITA

e2510
- PDF (English)
DOI: https://doi.org/10.55713/jmmm.v36i1.2510
Surface properties and in-vitro bioactivity studies of TiO2 nanowire doped transition metal (M=Fe, Co, and Mn)

Misriyani MISRIYANI, Enayah ENAYAH, Z. Ryan TIAN, Andi Meutiah ILHAMJAYA

e2527
- PDF (English)
DOI: https://doi.org/10.55713/jmmm.v36i1.2527
Properties and printability of polylactic acid films : An effect of polyglutamate coated natto as a bio-plasticizer

Natrata THITINARDWONG, Thira CHAVARNAKUL, Kawee SRIKULKIT

e2533
- PDF (English)
DOI: https://doi.org/10.55713/jmmm.v36i1.2533
A top-electrode-based liquid-solid triboelectric nanogenerator for energy harvesting and ethanol detection

Subrat BHOL, Nakul Charan SAHU, Sunit Gaurav MOHANTY, Vicky Raj MADDALA; Basanta Kumar PANIGRAHI, Premkumar Bhosale

e2600
- PDF (English)
DOI: https://doi.org/10.55713/jmmm.v36i1.2600

ปีที่ 36 ฉบับที่ 1 (2026): March

บทความปริทรรศน์

A review on biomass-derived hard carbon anodes for sodium-ion batteries: From carbon precursors to storage mechanisms

Original Research Articles

Mechanical properties and crystallization of polybutylene terephthalate reinforced with glass flakes and aluminum powder

Synthesis, structure, and electrochemical properties of the Ni(OH)\(_{2}\)/NiMoO\(_{4}\) composite on the rGO/NF template for hybrid battery-supercapacitor electrodes

Development of poly(lactic acid)/ethylene-propylene-diene monomer/cellulose composites using cellulose extracted from hemp biomass for plastic packaging applications

Effects of gum additives on nickel electroplating for enhancing steel corrosion resistance

Effect of Cu content on microstructure, morphology, and antibacterial properties of Ti-Cu alloy thin films

Contributions of carbon content and cooling rate on phase transformations and mechanical properties of sintered Fe-1.5Cr-0.2Mo-xC alloys

Synergy of ground granulated blast-furnace slag and limestone powder in ternary cement: Effects on heat of hydration and strength development

Effect of garnet incorporation on the functional properties of sunscreens

Synthesis and photoluminescence properties of graphene quantum dots prepared via carbonization under pressure reduction

Effects of welding currents on microstructure and corrosion behaviors of Inconel 625 cladding on 2.25Cr-1Mo steel by Hot-wire TIG

Development of 4-vinylbenzyl chloride (VBC) grafted onto branched polyethylenimine (PEI) onto bacterial cellulose sheet by gamma-induced irradiation technique for Cu\(_{2+}\) ion adsorption

High temperature storage reliability of Cu pillar flip chip interconnects

Degradation of wastewater by Advanced Oxidation Processes using green synthesised CuO nanoparticles

Dual-functional activated carbon from coffee grounds for crystal violet dye removal and subsequent application as an electrode material in energy storage devices

Investigation on the tribological properties of Al\(_{2}\)O\(_{3}\)-TiC substrates in fixed abrasive lapping for data storage applications

Surface properties and in-vitro bioactivity studies of TiO2 nanowire doped transition metal (M=Fe, Co, and Mn)

Properties and printability of polylactic acid films : An effect of polyglutamate coated natto as a bio-plasticizer

A top-electrode-based liquid-solid triboelectric nanogenerator for energy harvesting and ethanol detection

ภาษา

citescore

Information

index

checklists

sjr